13
Monitor:
Prior to transmitting or dialing, the user should Monitor the channel to see if there is activity on the
channel. If there is activity, the user should wait until the channel is clear. Pressing the MONITOR button sends
the High-Level Guard Tone followed by the Monitor Function Tone to the tone remote adaptor giving it a
command to open the squelch of the radio. Depending on the tone remote adaptor this can be momentary or
latched. If momentary, the tone remote adaptor will close the squelch of the radio after a set amount of time. If
latched, the squelch will remain open until the tone remote adaptor receives a second Monitor command from the
TRC.
Receiving:
When a field radio keys up, the tone remote adaptor passes the voice down the line to the TRC. The
voice will then be passed through to the internal speaker of the TRC.
Line 2/Supervisor Capability (* + #):
If the TRC is ordered with TRC Option E, then the TRC is equipped with
the Line 2/Supervisor Capability. Line 2 is used for toggling between 2 different base station radios and
Supervisor is used to shut down any paralleled remotes. Pressing the * and # keys simultaneously activates the
Supervisor or the Line 2 mode depending on the options installed in the unit. Pressing the keys again deactivates
the Supervisor or the Line 2 mode. When activated LED 1 changes from red to orange.
Memory Dialing:
The TRC supports up to 9 memory dials (1-9). Press and release the * key, followed by the
desired 1-9 number key for 1 second.
Last Number Redial:
The TRC can recall the last sequence dialed by pressing and releasing the * key followed
by the SEND key.
ANI Review Mode:
Pressing FREQ and INTER at the same time while in Control Mode will change the mode to ANI Review Mode. In
this mode, the ANI is shown first on the first line followed by the timestamp. The second line shows the alias of
the decoded ANI, if programmed.
When ANI Review Mode is brought up the last incoming ANI is shown first. Pressing the FREQ scrolls the log to
the next most recent ANI in the log. Pressing INTER scrolls the log to the newer entries in the ANI log. When
there are additional older ANI’s to be displayed then the < icon is shown to the left. When there are additional
newer ANI’s to be displayed then the > icon is shown to the right.
If the status feature is enabled and a status is received with the ANI, then the ANI will alternate every 2 seconds
between the ANI and the status message.
To return to the Control Mode press FREQ and INTER simultaneously or press the CLR # key.
Call Mode:
To enter call mode press the MENU key and CALL will be displayed on the LCD. Press the SEND key to select
the CALL function.
Direct Dialing:
Once in the call mode as above, simply press the numeric keys of the desired dialing sequence
and press SEND.
Database Dialing:
Once in the call mode as above, simply press the INTER key to scroll right through the
database until the desired ID is found. Once found, press the SEND key. If while scrolling the desired ID is
passed by, press the FREQ key to scroll left.
1234 12:00
< John Smith >
