20
SETUP menu
TIME SETUP <2>
In order for the correct time to be displayed, the real-time clock must be set. Time is represented in 24-hour
format and all four digits must be entered.
Range: 0000-2359
Default: 0000
SPEED DIAL SET <3>
Speed Dial feature:
When in Control Mode or ANI Review mode, the number keys <1> through <9> may be
turned into speed dial keys by enabling this feature.
OFF
Speed dialing disabled.
ON
Speed dialing enabled.
Speed Dial 1-9:
To associate a unit to a speed dial number, it must be in the user database. For each speed
dial entry, simply locate the user in the database in the same manner as if placing a call to a unit.
Range: 0-14
characters
Default: blank
SOUNDS SETUP <4>
Keypad Beep:
Turning this option on causes a beep to be heard for each key press.
OFF
Keypad beeps off
ON
Keypad beeps on
Beep On ANI:
Turning this option on will cause an alert beep to be heard every time a new ANI is received.
OFF
Do not beep when ANI comes in.
ON
Beep when ANI comes in.
Emerg Siren:
This causes a siren sound to be heard when an emergency ANI is received. This requires
turning on the Emerg Status option in the STATUS SETUP.
OFF
Do not sound siren on emergency ANI.
ON
Sound siren on all emergency ANI’s.
Go-ahead Beep:
When using the TRC as an encoder, it will take some time for the signaling to take place.
The operator must wait for this time to elapse before speaking or he/she will not be heard. The go-ahead
beep alerts the operator when the signaling is complete so they will know when it is okay to begin speaking.
OFF
Disable go-ahead beep.
ON
Enable go-ahead beep.
Cross Mute:
If using more than one TRC in the same room, feedback (howling) may occur if one unit is
transmitting while another is listening. Enabling Cross Mute prevents this from happening by muting the
internal speaker whenever guard tone is detected.
OFF
Cross Mute disabled.
ON
Cross Mute enabled.
Auto Mute time:
Specifies the amount of time after guard tone is detected that the internal speaker will be
muted. This facilitates muting of the function tone and/or signaling tones generated by parallel remotes. All
four digits must be entered. If 0000 is entered, the feature is disabled.
Range:
0000 to 9999 milliseconds
Default: 0000
milliseconds
