36
Remove the screw that holds the blower plate to the microwave.
Remove and save the screw holding the blower motor to the microwave.
2. Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust
the blower unit.
3. Roll the blower unit 90° so that fan blade openings are facing out the top of the
microwave.
4. Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit wiring. Make sure the wires are not
pinched, and that they are properly secured.
Blower Plate
Blower Motor
Screw
Back of
Microwave
End B
End A
Back of
Microwave
Back of
Microwave
After Rotation
Back of
Microwave
Back of
Microwave
AFTER: Fan Blade
Openings Facing Top
