Midea MONB-76C, Техническое руководство

Страница: 27 / 87

Midea R22 T1 side-discharge duct manual MCAC-RTSM-201301-01
16

When in steel beam and girder structure, set and use supportive angle steel.

After install the indoor units, use a hoisting device to hoist the indoor unit, and align it with the
installation screws to adjust the horizontality. Finally, Tighten the screws.
3.2 Designing and connecting the duct

The duct accessories and materials must be produced by professional manufacturers.

Int order to prevent air flow shoting, do not set the air inlet orifice near the air outlet orifice.

Install a filter at an easy-to-maintain place such as intake pipe. If without the filter, the duct will
gether on the air heat exchanger and lead to fault and water leak of the air conditioner.

In order to suppress noise effectively, install noise suppression and sound insulation devices,
especially in the noise-sensitive spaces such as meeting rooms.

For connection of the flange plane, use non-flammable canvas adapter to prevent transmission
of vibration. Use M6×20 screws (configured on site) for connection.
View of air outlet side