Midea MONB-76C, Техническое руководство

Страница: 76 / 87

MCAC-RTSM-201301-01 Midea R22 T1 side-discharge duct manual
65
※
Push the TEMP button to set the desired temperature from 21
°C
to 28
°C
.
※
Push the ON/OFF button. The operation lamp lights and the air conditioner start to operate in the
DRY mode. Push the ON/OFF button again to stop this unit operation.
Notes:
Due to the difference of the set temperature of the unit and the actual indoor temperature, the Air Conditioner
when in DRY mode will automatically operate many times without running the COOL and FAN mode.
5) TIMER Operation
Push TIMER button to set the unit what time turn on or off.
a. To set the STARTING time.
※
Push the CANCEL button to cancel any former settings.
※
Push the TIMER button. The remote controller will show the TIMER and the signal "h" is shown on
the display panel. The control is now ready to reset the TIMER ON to start the operation.
※
Push the TEMP button (
▲
or
▼
) to set desired unit START time.
※
After setting the TIMER there will be a one-half second delay before the remote controller
transmits the signal to the Air Conditioner. Then, after approximately another 2 seconds, the set
temperature will re-appear on the digital display.
b. To set the STOPPING time.
※
Press the CANCEL button to cancel any former settings.
※
Push the TIMER button and the remote controller will show the last set time for the START
operation and the signal " h " will be shown on the display panel. You are now ready to readjust the
TIMER OFF to stop the operation.
※
Push the TEMP button to cancel the TIMER ON setting. The digital area will show " 00 ".
※
Push the TIMER button and the remote controller will show the last set time for the STOP
operation and the signal " h " will be shown on the display panel. You are now ready to reset the
time of the STOP operation.
※
Push the TEMP button (
▲
or
▼
) to set the time you want to stop the operation.
※
After setting the TIMER there will be a one-half second delay before the remote controller
transmits the signals to the Air Conditioner. Then after approximately another 2 seconds, the set