Midea MOB01-09HFN8-QRD6GW, Руководство по установке

Страница: 33 / 39

Quick Step Installation Guide
Mission High Wall Quick Step Installation Guide
Step 1:
Prior to unpacking equipment please inspect boxes for any transport damage to ensure products are in perfect condition.
Step 2
: Ensure the equipment model numbers on the boxes correspond with your companies purchase order.
Step 3:
Unpack the equipment and ensure all parts are accounted for i.e Indoor / Outdoor & Infra-red Controller.
Step 4:
Store the Infra-red service controller safely as this can be used to speed up commissioning and servicing process.
Step 5:
Review the installation and maintenance manuals which are provided.
Step 6:
Carry out the positioning and installation of indoor and outdoor units as per guidelines within the installation manual.
Step 7:
Install refrigerant pipework (Purge with OFN while brazing), electrical wiring & drainage pipe work.
Step 8:
Power & Interconnecting control wiring between indoor and outdoor units is made by linking into terminals W-1(L)-2(N)-S-E.
Step 9:
Pressure test pipework (Note do not carry out pressure test while connected to outdoor unit to prevent contamination of factory charge)
(1) Strength test in 5 Bar increments up to full test pressure. (2) Then leak test at lower pressure. Evacuate system to 2 torr or lower for appropriate time.
Step 10:
If required please add additional refrigerant charge (see table on reverse).
Step 11:
Carry out all the commissioning checks required to activate the warranty of the newly installed system.
Step 12:
Perform the test operation in accordance with the installation manual to ensure all functions and parts are working correctly.
Step 13:
Complete your warranty card document and e-mail this with dated photo of outdoor serial number to: warranty@fgeuropeuk.co.uk
Note:
Installation videos can also be found on the Midea UK YouTube channel.
Please contact your Midea support team if you have any issues during the installation and commissioning process.
Tel:
02074 092009
E-Mail:
technical@fgeuropeuk.co.uk
Indoor
Model
Outdoor
Model
Cooling Duty
(Kw)
Heating Duty
(Kw)
Outdoor Dimensions
Outdoor Weight
(Kg)
Indoor Dimensions
Indoor
Weight(Kg)
W(mm) D(mm) H(mm) W(mm) D(mm) H(mm)
MSMBAU-09 MOBA02-09 3.3 3.75 770 300 555 27.1 730 198 293 7.4
MSMBAU-12 MOBA02-12 4.5 4.9 800 333 554 29.7 810 200 300 8.2
MSMBAU-18 MOBA02-18 6.2 6.8 800 333 554 37.2 980 225 335 10.5
MSMBAU-24 MOBA02-24 8.1 9.3 845 363 702 48.5 1090 235 338 12.9
Piping Information
Model: 09 12 18 24
Liquid Line Inch 1/4 1/4 1/4 3/8
Gas Line Inch 3/8 3/8 1/2 5/8
Drain Line Φ mm 16 16 16 16
Max Length M 25 25 30 50
Max Height M 10 10 20 25
Electrical Wiring Information
Model: 09 12 18 24
Mains Outdoor 3x1.5mm² 3x2.5mm²
Interconnecting/Indoor Power 5x1.5mm² 5x2.5mm²
Power Supply Information
Model: 09 12 18 24
Outdoor Ph/A 1/16 1/16 1/16 1/20
Indoor Powered from Outdoor Unit
Refrigerant Charging Information
Model: 09 12 18 24
Pre – Charge Kg 0.8 0.95 1.48 2.0
Charged to M 5 5 5 5
Additional g/m 15 15 15 30
Refrigerant Type R410A
Wi Fi Control Available as Standard

Page
33 
12