Midea MLCAC-UTSM-2010-10 Скачать руководство пользователя страница 9

Страница: 9 / 95

MLCAC-UTSM-2010-10

Features

General Information

Features

4.1 Universal outdoor unit design

Indoor unit with the same capacity can match with the same outdoor unit.

4.2 High efficiency and energy saving.

Thanks to the DC inverter technology and optimized piping system, the EER and COP of whole

series can easily reach A-class.

4.3 Low noise and low starting current.

Thanks to the DC inverter technology, the system can work with low noise, and very small starting

current.

4.4 Intelligent refrigerant adjustment technology.

Throttle part is made up of capillary and electronic expansion valve (EXV). The outdoor unit can

output the most accurate capacity in any condition.

4.5 Working in cooling mode under -15

℃

Outdoor unit built-in with low ambient kit, it can control the outdoor unit’s fan and cooling can be

performed throughout the year for computer rooms, banquet halls, etc. Wide operation range
covers outdoor temperatures as low as -15

℃

for cooling.

4.6 Indoor & outdoor unit’s power supply is separate.

4.7

All indoor units have network control function.

4.8 All indoor units have Auto-restart function.

Содержание MLCAC-UTSM-2010-10
































































































Результаты поиска

Содержание MLCAC-UTSM-2010-10

Отзывы:

Бренды по названию

Популярные бренды

Midea MLCAC-UTSM-2010-10, Руководство по обслуживанию

Результаты поиска

Содержание MLCAC-UTSM-2010-10

Отзывы:

Бренды по названию

Популярные бренды