Midea MLCAC-UTSM-2010-10, Руководство по обслуживанию

Страница: 86 / 95

Insulation Work MLCAC-UTSM-2010-10
104 Installation
5. Insulation Work
5.1 Insulation material and thickness
1). Insulation material
Insulation material should adopt the material which is able to endure the pipe’s temperature: no less than 70 in the high-pressure side, no
less than 120 in the low-pressure side(For the cooling type machine, no requirements at the low-pressure side.)
Example: Heat pump type----Heat-resistant Polyethylene foam (withstand above 120 )
Cooling only type---- Polyethylene foam (withstand above 100 )
2). Thickness choice for insulation material
Insulation material thickness is as follows:
Pipe diameter (mm) Adiabatic material thickness
Refrigerant pipe
Φ 6.4— Φ 25.4 10mm
Φ 28.6— Φ 38.1 15mm
Drainage pipe
Inner diameter Φ 20— Φ 32 6mm
5.2 Refrigerant pipe insulation
1). Work Procedure
Before laying the pipes, the non-jointing parts and non-connection parts should be heat insulated.
When the gas proof test is eligible, the jointing area, expanding area and the flange area should be heat insulated
2). Insulation for non-jointing parts and non-connection parts
wrong right
Gas pipe and liquid pipe should
not be put together to insulate
Insulate the gas pipe
(cooling only)
Insulate the gas pipe and
liquid pipe