组 装方法
Assembly Instruction
使用说明
User Instr uctions
1 .榨汁杯 底部橡 胶 垫片的 组 装方 法
将 榨汁底 部橡胶 垫 片一边 拔 出
後
,请按下图方向插入。
注意 :橡 胶垫 片必 需安 装 到位, 否 则会 出 现 漏 汁问 题。
Pull out one side of the rubber gasket at the bottom of juicing bowl, and insert it in the direction shown
in the figure below.
How to assemble the rubber gasket at the bottom of juicing bowl
Note: The rubber gasket must be properly installed to avoid juice leakage.
榨 汁 杯 底 部
橡胶 片 插 入方 向
紧 密插入
完全安装妥当状态
Bottom of juicing bowl
Rubber gasket
insertion direction
Inserted tightly
Status after proper
installation
2.
将 榨汁 杯安 装 在主体 上
如 下 图 将 榨 汁 杯 插 在 主 体 的 固 定 点 处 。
*
向下安装时榨汁杯上的标示线与主机上的标示线对齐
3.将 滤网 放入 刷架 中
固 定点
Fixing points
As shown in the figure below, insert the juicing bowl onto the
base by aligning with the fixing points on the base.
During downward installation, please align the mark
line on the juicing bowl with that on the base.
Assemble the juicing bowl onto the base
Put the strainer into the brush rack
滤网标 示 点
Mark point on
the strainer
榨汁 杯 标 示 点
Mark point on the
juicing bowl
4
.将 组 装好的 榨 汁筒 和 清 洗 架装 入杯中
*
安装时请按右图所示按滤网上标示点和
榨汁杯上的标示点对齐。
Install the strainer and cleaning rack assembly
into the juicing bowl
During installation, please align the mark point
on the strainer with that on the juicing bowl, as
shown in the figure on the right.
7
Содержание MJ-JS20A1
Страница 20: ......