Instructions for Use
Preparation before using:
After power on, the buzzer beep once, all the indicators
light up for 1 second then go out, indicating the induction
hotplate enters the state of standby.
Put the pot in the center of the heating zone.
Operation Instructions
After the “ON/OFF” key is pressed, all the indicators show
“-”. According to the heating zone where the pot is placed,
At the moment, press the "+" or "-" button, the indicator
displays 5, then adjust the power levels using the“+” or“-”
button. Press the "+" and "-" buttton simultaneously, the
hotplate immediately returns the power setting to 0 and
the corresponding
cooking zone switches off.
See the attached table on PAGE 8
for the power specific
to each heating zone.
Note: After the “ON/OFF” key is pressed, the induction
hotplate will restore to its standby state if no any operation
is carried out within 1 minute.
Boost function
To get a quicker heating speed, directly press “BOOST”
after selecting the heating zone, with the power level indicator
showing “P. ” This function can reach the heating power of
up to 2800W.
Note:
1. The boost function only operates for 5 minutes, after
which the cooking zone returns to its orginal setting.
2. The boost function only works on the 3rd zone.
3. As the boost function of 3rd is activated ,the 4th cooking
zone is limited under level 2 automatically.
6
Cancellation of “BOOST” function
Select the corresponding cooking zone and press the "Boost"
key or "-" to cancel the Boost mode, then the cooking zone will
revert to its original setting.
