Cautions
4.
5.
1. The induction hotplate must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation
by yourself.
The induction hotplate shall not be mounted to cooling equipment, dishwashers
and rotary dryers.
The induction hotplate shall be installed such that better heat radiation
can be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall withstand
heat.
To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
2.
3.
4
Power line connection
The socket shall be connected according to the relevant standard
or connected to a single-pole cut-out. The method of connection
is shown in Figure (3):
4
3
Figure (3)
Fix the hob on the table by screw four brackets on the bottom of hob
(see picture) after installation. Adjust the bracket position to suit for
different table top thickness.
screw
bracket
base
screw hole
blue
green-yellow
N2
N1
L2
L1
grey
brown
black
220-240V
220-240V
blue
green-yellow
N
L2
L1
grey
brown
black
400V
220-240V
220-240V
PE
blue
green-yellow
N
L
grey
brown
black
220-240V
PE
PE
connet to the main power supply
connet to the main power supply
connet to the main power supply
220-240V 2+2N~
220-240V~
400V~ 2-N
