background image

2

We have designed this hob for private use in home.
With a view to constantly improving our products, we reserve the right to make
any changes to their technical, program or aesthetic features connected with
their technical evolution.

Over- Temperature Protection

A temperature sensor equipped can monitor the temperature inside the hotplate.
When an excessive temperature is monitored, the induction hotplate will stop operation
automatically.

Heat Indication

When the hotplate is used for a long time, waste heat remains in the heating zone
in a few minutes. The code “H” appears, warning to be away from the heating zone.

Auto shutdown protection

Auto shut down is a safety protection function for your induction hotplate. It shut down
automatically if ever you forget to turn off your cooking. The default working times
for various power levels are shown in the below table: .

Power level

The heating zone shut down

automatically after

1~3

4~6

7~9

8 hours

4 hours

2 hours

Safety

*

Remind:

The patient with a heart pacemaker shall use this product under
the guidance of the doctor.

3

4

Detection of Small Articles

When a unsuitable size or non-magnetic pan (e.g. aluminium), or some other small
item (e.g. knife, fork, key) has been left on the cooking zone, the corresponding  
indicator will appear a  "    " and the cooking zone will switch off after one minute

2

When the pot is removed, the "    " appears, and the induction hotplate stop 
heating immediately, then switch off after one minute.

Содержание MC-IF686














Отзывы: