Air intake
Air exit
Figure (2)
mini 5 cm
mini 5 mm
mini 2 cm
Under any circumstances, make sure the induction hotplate is well
ventilated and the air inlet and outlet are not blocked.
Ensure the induction hotplate is in good work state. As shown in
Figure (2)
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
3
Installation
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the
drawing. For the purpose of installation and use, a minimum of 50 mm
space shall be preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please
select heat-resistant table material to avoid larger deformation caused
by the heat radiation from the hotplate.
As shown in Figure (1)
1
2
Figure (1)
5 cm mi
ni
5cm mi
ni
5cm mi
ni
56/75/90
cm
49 cm
