background image

Betriebs- und Montageanleitung: Einbaulösung

Operating and Assembly Instruction: Built-in Solution

Version 09/2016 - de/eng

InductWarm

®

 

130 

Built-in and Undercounter

Inhalt / Contents

 

Deutsche Version

Einleitung  ...................................................................................................................... 3
Inbetriebnahme und Bedienung  ....................................................................................... 5
Störungsbehebung ..........................................................................................................7
Sicherheitsbestimmungen ...............................................................................................7
Allgemeine Informationen ...............................................................................................9
Einbauzeichnungen  .......................................................................................................11
Übersichtszeichungen ....................................................................................................12
Gehäuse ........................................................................................................................13
Bestückungsmöglichkeiten .............................................................................................13
Externe Bedieneinheit ....................................................................................................13
Einbaubeispiel ...............................................................................................................13
EG-Konformitäterklärung ...............................................................................................14

English Version

Introduction ..................................................................................................................16
Initial Start-up and Operation  ........................................................................................18
Troubleshooting ............................................................................................................ 20
Safety Regulations ......................................................................................................... 20
General Information ...................................................................................................... 22
Built-in Drawings  ......................................................................................................... 24
Assembly Drawing......................................................................................................... 25
Housing ....................................................................................................................... 26
Equipment Options ....................................................................................................... 26
External Control Unit .................................................................................................... 26
Construction Example ................................................................................................... 26
EC Declaration of Conformity ......................................................................................... 27
Contact ........................................................................................................................ 28

Summary of Contents for InductWarm 130















Reviews: