MCAC-HTSM-201409 Midea R410A Domestic Pools & Spas HPWH 50Hz Technical Manual
32
Average water flow 5.5m
3
/h
– pressure drop 0.22bar.
Installation diagram
V1, V2, V3: By-pass valve;
V4, V5: Regulator valve (Recommended facilitating adjustment close to the machine.
2.8 Electric connection of the unit
The heat pump water heater shall have a specialized power supply, which voltage must in
compliance with the rated voltage.
Power supply circuit of the unit with earthing wires that must be reliably connected.
Wiring must be performed by professional technicians according to the circuit diagram.
Power cable and signal cable shall be laid out orderly and properly separate power cable
from signal cable.
Power cable is attached to this equipment. User could select power cable by reference to
power supply specifications. Shield wire must be employed for signal wire.