Midea 190RDN3-E, Инструкция по установке и эксплуатации

Страница: 14 / 20

11
Installation & Owner‘s Manual
25
26
Set Timer-TIME ON ONLY
Time on only:
If the Timer is set to TIME ON, the unit will
automatically operate once between the setting
of the clock and the last 24 hours.
Cancel Timer-TIME ON ONLY
In the unlocked state, press the button for 3
second and the Timer-TIME ON function will be
canceled.
Set Timer-TIME ON & TIME OFF
Time on & Time off:
If set the Timer-TIME ON & TIME OFF, the unit
will automatically operate between the setting
TIME ON clock and TIME OFF clock.
If the TIME OFF clock is the same as TIME ON
clock, TIME OFF clock will be delayed 10
minutes automatically.
Press the button to enter
Timer-TIME ON setting. the hour
value of the clock will flash slowly.
Pressing the button again or no
operation for 10 second, flashing will
stop and confirm the Timer-TIME ON
setting.
Press the button again, confirm
the hour setting. Then the minute
value of clock will flash slowly.
Set the hour value of clock.
Set the minute value of clock.
Set the hour value of clock.
Set the minute value of clock.
27
28
Cancel Timer-TIME ON&TIME OFF
In the unlocked state, press the button for more
than 3 seconds and the Timer-TIME ON & TIME OFF
function will be canceled.
INCREASE/UP
If button is unlocked, corresponding value will
increase by pushing .
● When setting temperature, press for more
than 1s, temperature value will be increased
continuously;
● When Setting clock/timer, press for more
than 1s, Clock/timer value will be increased
continuously.
DECREASE/DOWN
If button is unlocked, corresponding value will
decrease by pushing .
● When setting temperature, press for more
than 1s, temperature value will be decreased
continuously;
● When Setting clock/timer, press for more
than 1s, Clock/timer value will be decreased
continuously.
Press the button to enter
Timer-TIME OFF setting. the hour
value of the clock will flash slowly.
Press the button again, confirm
the hour setting. Then the minute
value of clock will flash slowly.
Pressing the button again or no
operation for 10 second, flashing will
stop and confirm the Timer-TIME
OFF setting.
Press the button to enter
Timer-TIME ON setting. The hour
value of the clock will flash slowly.
Pressing the button again or no
operation for 10 second, flashing will
stop and confirm the Timer-TIME ON
setting.
Press the button again, confirm
the hour setting. Then the minute
value of clock will flash slowly.
Set the hour value of clock.
Set the minute value of clock.