Chapter 4: Using the Command Line Interface
156
Wireless LAN Diagnostic Log
This command shows the diagnostic log for the wireless LAN connection.
#
show wlanlog
Component Reachability Information
This command shows all component reachability information with a list of monitored servers and status.
#
show componentReachability
Component Reachability Information for a Specific Component
To show the component reachability information for a certain device only, use the following command.
#
show componentReachability
component <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show componentReachability
component <n>
details
Variables:
•
<n> is a number representing the sequence of the device in the monitored component list.
You can find each device's sequence number using the CLI command of
show componentReachability
as
illustrated below.
Displayed information:
•
Without the parameter "details," only the specified device's IP address, monitoring enabled/disabled state and current
status are displayed.
•
With the parameter "details," more settings for the specified device are displayed, such as number of pings and wait
time prior to the next ping.
Command History
This command syntax shows the command history for current connection session.
#
show history
