manualshive.com logo in svg

Midas DL451, Руководство оператора

Поделиться
Скачать
Midas DL451 Скачать руководство пользователя страница 19

Package contents/unpacking

3

DL451 Modular I/O
Operator Manual

Package contents/unpacking

Please retain the original packing for use should you need to transport or ship this unit.

After unpacking, please inspect the unit carefully for any signs of damage that may 
have occurred in transit and notify the courier immediately if you feel that any damage 
has occurred.

Packing list

The following is a list of the main items contained in the DL451 Modular I/O package:

• 1-off DL451 Modular I/O unit.
• 1-off DL451 Modular I/O operator manual (this document), part number 

DOC02-DL451.

• 1-off warranty card, part number DOC04-WARRANTY.
• 1-off mains lead, part number PWR21-MAINSLEAD.

Features

The DL451 Modular I/O comprises:

• Up to 24 audio inputs and 24 audio outputs.
• Modular construction providing user-configurable 3x8 XLR format.
• Fully isolated GPIO connections supplied as standard.
•

in

, 

out

 and 

thru

 MIDI sockets supplied as standard.

• Dual redundant AES50 connections provided at the digital audio interface.

Содержание DL451













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды