Midas APOLLO QA018, Инструкция по монтажу

Страница: 10 / 25

MIDAS Group 2020
9
PRECAUTIONS
Hydromassage should not last too long and, especially in the initial period of its
use. In time, the duration of hydromassage application may gradually be
extended, however, general physical condition must always be observed. The
recommended duration of a hydromassage amounts to 20 minutes (optimal
duration in order to reach a desired outcome).
CLEANING AND MAINTENANCE
Full maintenance of all components of a cabin with hydromassage must take
place frequently. Recommendations specified here must be carefully observed in
order not to destroy the gloss of acrylic elements and metal parts.
Soft cloths and generally accessible cleaning agents which do not cause
scratches should be applied for everyday cleaning.
Clothes with artificial fibres, sharp sponges, tampons with metal needles and
cleaning agents in powder as well as liquid, containing abrasive substances or
ammonia, alcohol, home-applicable acids, acetone or other solvents cannot be
used, since they may damage surfaces. No aggressive chemical cleaning agents
can be applied.
Calcareous sludge may be removed with citric acid or vinegar dissolved in water,
using a soft cloth.
It is recommended to install a water-softening device in order to avoid
sedimentation of limescale.
For cleaning glass and mirrors the use of products available on the
market designated for cleaning windows (not containing ammonia) is
recommended.
If small scratches appear on the surface of the cabin, fine-grain adhesive paper
may be used (grain 1200#) for polishing these spots. After this treatment, these
surfaces may additionally be covered with a small amount of standard toothpaste
or polishing paste, which may then be followed by polishing these spots with a soft
cloth, obtaining through this a new, clean and shiny area.
The armature should be regularly cleaned, at least 3 times a month or more
frequently, depending on the needs.
Gilded or chrome-plated elements do not require frequent polishing. Blunt tools
or knives should not be used to scrap the surface of the cabin.
Water should be drained immediately after the shower, which should be
followed by cleaning the cabin and switching off power supply.
For the cabin with hydromassage to preserve its initial polish for many years, it is
recommended to use water with temperature not exceeding 60°C.