Midas APOLLO QA018, Инструкция по монтажу

Страница: 12 / 25

11
MIDAS Group 2019
!
P
230
V
FUNCTION SWITCH AND MIXER
The control system presented on the picture may vary from the one installed in the
cabin,
depending on individual cabin accessories. Each cabin contains:
- single-lever mixer (water valve letting the flow of water in and mixing
cold and hot water
- function switch directing the flow of water from systems mounted in the cabin
(hand shower, upper shower, water nozzles, foot massager). Grips for
mounting the foot massage panel etc. are located on the cabin wall.
Note! Depending on the selected cabin accessories, either one or two
simultaneous functions may be set up.
MIXER
temperatur
e regulation
Lifting mixer handle increases the flow of water,
when moved downward it decreases the flow. In
order to increase water temperature, one must turn
the handle to the left - in order to decrease it - to the
right.
The massage function in the cabin is realized by
means of massage nozzles mounted on the shower
panel. Narrow directional stream of water at large
pressure is applied in its operations. The use of
massage function has an impact on:
FUNCTION
SWITCH - muscle relaxation
- painkilling properties
Individual functions are supported by turning the
handle of function switch to the left or to the right.
These functions are independent from one another
and cannot work simultaneously.
!
connect the telephone line if the telephone function is used.
The cabin can be plugged in after verifying its tightness!
Connection must be performed by an authorized electrician. Connection must
be performed in accordance with the currently valid standards. At this stage
one must