Microtronics myDatalogEx, Руководство пользователя

Страница: 47 / 84

Chapter 9 Initial Start-Up
Chapter 9 Initial Start-Up
9.1 User information
Before you connect the myDatalogEx and place it into operation, you must observe and comply with the
following user information!
This manual contains all information that is required for using the device.
Is intended for technically qualified personnel who have the relevant knowledge and experience in the area of
measurement technology.
Read this manual carefully and completely in order to ensure the proper functioning of the myDatalogEx .
Contact Microtronics Engineering GmbH(see "Contact information" on page 83) if anything is unclear or if you
encounter difficulties with regard to installation, connection or configuration.
9.2 Applicable documents
In addition to this operating instructions, additional instructions or technical descriptions may be required for
the installation, commissioning and operation of the entire system.
These instructions are enclosed to the respective additional devices or sensors or are available for download
on the Microtronics website.
9.3 General principles
The entire measurement system may only be placed into operation after completion and inspection of the
installation. Study the manual thoroughly before placing into operation to prevent faulty or incorrect
configuration.
Utilise the manual to familiarise yourself with the operation of the myDatalogEx and the input screens of the
myDatanet server before you begin with the configuration.
9.4 Placing the system into operation
9.4.1 Using the mobile connection (2G/3G) and the myDatanet server
Note: It is recommended that the myDatalogEx is first placed into operation in the office before moving the
device to the place of use. During this process, you should set a site for the later operation on the myDatanet
server (see "myDatanet Server Manual " 805002) and determine a site setting (see "Site configuration" on page
54). Take the opportunity to get to know the functions of the device in a stable environment. You can also use
suitable test signals to simulate the sensors to establish the optimum configuration of the myDatalogEx prior to
its actual first use. This reduces the amount of time required for on-site installation to a minimum.
Rev. 05 47