Microtronics myDatalogEx, Руководство пользователя, Страница: 54 / 84

10.2 User interface on the myDatanet server
10.2.1 Site configuration
Note: Depending on the respective user level, some of the configuration fields mentioned in the following sub-
chapters may be hidden. In this case, please contact the administrator of the myDatanet server.
Click on the name of the site in the list of sites to open the specific input screen for configuring the site. Clicking
on the symbol to edit the site will take you to the default input screen for configuring the site (see "myDatanet
Server Manual " 805002).
10.2.1.1 Setup data
"Setup data" configuration section
1 Opens an illustration to explain the progress of setup mode
2 Status information on the currently active or last executed setup mode
3 Visualisation of the GSM level values measured in the last 35 minutes. The graph may therefore contain
the results of several executed setup modes.
4 Visualisation of the GSM level values measured during a single setup mode
10.2.2 Device configuration
Note: Several of the configuration fields in the following sub chapters may possibly be hidden depending on the
respective user level. In this case, contact the myDatanet server administrator.
You can reach the input screen for configuring the device by clicking on the serial number in the site list (see
"myDatanet Server Manual " 805002) or by clicking on the device name in the device name list (see
"myDatanet Server Manual " 805002).
10.2.2.1 Comments
Comments
Free comment field (is also displayed below the site name in the measurement instrument list)
54 Rev. 05