Microtronics myDatalogEx, Руководство пользователя

Страница: 29 / 84

Chapter 6 Functional principle
3. Wait until it is indicated in the list of measurement instruments that the device is in setup mode. This is
indicated by a speech bubble with the "Setup" inscription.
The myDatalogEx terminates the connection to the server and starts to measure the GSM level for a
period of up to 3min. . The speech bubble with the "Setup" inscription continues to be displayed during
this process. The remaining time until the second connection to the server completed as part of setup
mode is shown on the display of the device and in the "Setup data" configuration section.
Note: You must first open the site settings to access the "Setup data" configuration section (see "Site
configuration" on page 54).
Current GSM level and remaining duration of the GSM level measurement
"Setup data" configuration section: Setup mode phase 1 (GSM level measurement)
1 Remaining duration of the GSM level measurement
4. Close the shaft lid.
Rev. 05 29