manualshive.com logo in svg

MicroTransponder 2100, Руководство пользователя

Поделиться
Скачать
MicroTransponder 2100 Скачать руководство пользователя страница 58

26-0002-0005/0 (en) (2022) 

58  

 

 

The Wireless Transmitter is intended for use in the electromagnetic environment in which radiated RF 
disturbances are controlled. The customer or the user of the Wireless Transmitter can help prevent 
electromagnetic interference by maintaining a minimum distance between portable and mobile RF 
communications equipment (transmitters) and the Wireless Transmitter as recommended below, according to 
the maximum output power of the communications equipment. 

Rated maximum 

output power of 

transmitter 

 

W 

Separation distance according to frequency of transmitter 

M 

150 kHz to 80 MHz 

 

𝑑𝑑

=  1.2

√𝑃𝑃

 

80 MHz to 800 MHz 

 

𝑑𝑑

=  1.2

√𝑃𝑃

 

800 MHz to 2.5 GHz 

 

𝑑𝑑

=  2.3

√𝑃𝑃

 

0.01 

0.12 

0.12 

0.23 

0.1 

0.37 

0.37 

0.74 

1 

1.2 

1.2 

2.3 

10 

3.7 

3.7 

7.4 

100 

12 

12 

23 

Table 17.4: Recommended Separation Distance Between Portable and Mobile RF 

Communication Equipment and the Wireless Transmitter 

Telemetry Description 

The Model 1001 IPG and Model 2100 Wireless Transmitter communicate with each other using 
ultra-low power Medical Implant Communications Service (MICS Band) telemetry in the 
frequency range 402 – 405 MHz.

 

This transmitter is authorized by rule under the Medical Device Radiocommunication Service (in 
part 95 of the FCC Rules) and must not cause harmful interference to stations operating in the 
400.150-406.000 MHz band in the Meteorological Aids (i.e., transmitters and receivers used to 
communicate weather data), the Meteorological Satellite, or the Earth Exploration Satellite 
Services and must accept interference that may be caused by such stations, including 
interference that may cause undesired operation. This transmitter shall be used only in 
accordance with the FCC Rules governing the Medical Device Radiocommunication Service. 
Analog and digital voice communications are prohibited. Although this transmitter has been 
approved by the Federal Communications Commission, there is no guarantee that it will not 
receive interference or that any particular transmission from this transmitter will be free from 
interference. 

This device may not interfere with stations operating in the 400.150-406.000 MHz band in the 
Meteorological Aids, Meteorological Satellite, and Earth Exploration Satellite Services and must 
accept any interference received, including interference that may cause undesired operation. 

 

 

 

Содержание 2100
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды