RESET ON BOTH TIMERS FROM THE KEYBOARD
RESET
can be applied to both timers by pressing buttons simultaneously:
On display:
[- - -] [- - -]
V. EDIT OF SETTINGS
In this mode, the timer operation mode, start mode and internal restart permission are set.
Entering this mode is done by pressing and holding for more than 5 seconds
simultaneously on the buttons
The following symbols appear on the display:
A
B
c
By button below the symbol 'A' enters the setting of Timer 1 parameters .
By button below the symbol 'В' enters the setting of Timer 2parameters .
By button below the symbol 'с' exits the setting mode.
By button below the symbol '
' enters the menu for configuring the outputs.
When one of the two timers is selected, the following symbols appear on the display:
O
P
c
By button below the symbol
О
the output type of the respective timer is set.
By button below the symbol the start mode for the respective timer is set.
By button below the symbol
Р
the reporting format of the respective timer is set.
By button below the symbol
с
exits to the above mode.
When editing the corresponding values, the display shows the following:
o
c
X
X
X
where XXX is the value to be edited with the buttons below the left display.
By button below the symbol
о
the entered value is confirmed and exits to a higher level
of the menu.
6
