migra MPB CAN
Large Format Graphics Compatible LED Display with CANopen Interface
Page 29
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0,
+49 9681 91960-10, [email protected], www.microsyst.de
3.7.6 Macros
Macros are predefined command sequences included in the device
configuration. They correspond to the data units in the control frames.
The first macro is executed after the device is switched on (if one
exists). Subsequent macros are executed every 100 ms. Macro
execution is stopped after the last macro has been executed.
3.7.6.1 Starting Macro Execution
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
ESC
Function
Macro no.
hundreds
Macro no.
tens
Macro no.
ones
1B
h
“M”
(4D
h
)
“0” - “9”
(30
h
-39
h
)
“0” - “9”
(30
h
-39
h
)
“0” - “9”
(30
h
-39
h
)
Execution starts with the specified macro.
Jumps within a macro sequence are also possible during macro
execution through the use of this command.