Peripherals 9
miriac SBC-S32V User Manual
V 1.1
64/81
© MicroSys Electronics GmbH 2017
9.4
MIPI CSI Interface
The SBC-S32V offers two serial camera interfaces via the connectors MIPIA and
MIPIB (Samtec QSE-020-01-F-D). Each connector contains a four-lane physical
layer, compliant with the MIPI Alliance Standard and a clock lane.
It also supports multiple cameras using Maxim deserializers.
Both interfaces are supplied with 5.0V and can be configured also for a 12V supply
via the two headers PWA and PWB. For more information about the power setting
for MIPIA and MIPIB please refer to
Only a single link per header must be set at a time. More
than one link installed may cause permanent damage to
the board!
MIPIA is controlled by I²C Bus 0 while MIPIB is handled by I²C Bus 1.
Each slot can be controlled by several digital IO lines according to following
diagram.
Figure 37: MIPI Configuration
