Microsonic TEL8018C, Руководство пользователя

Страница: 38 / 42

16
3. Press to stop the message playback.
To delete a message on TAM
Press the numerical key
2
with “X” while a message is playing. You will hear “MESSAGE DELETED” and the
current message you are hearing would be deleted, and the next message will start to play if there are more
messages.
Incoming Call Messages (ICM)
If the answering machine is ON and set for OGM1, when there is an incoming all, the answering machine will
answer it and play the OGM. Followed by a “beep”, the caller can then leave a message of up to 2 minutes on
the answering machine.
1. You can use the corded handset, the speakerphone or the cordless handset to intercept the call to speak
to the caller during ICM recording. Then the message that is currently being recorded will be saved as a
new message.
2. Recording will stop also if silence, busy tone or continuous tone is detected, and the message will be
saved.
Remote Control
If you are away from home, TAM can be accessed by remote control.
Use tone dialing to dial your numbers to access your answering machine from a remote location.
1) When you hear the OGM announcement, press “ ” key, the answering machine will enter the remote
control state, and prompt put in the 4-digit security code. The default security code is “0000” (if enter to
ICM record before you press key, then press key cannot enter to remote control function.)
2) If the security code is correct, you will hear a voice prompt telling you if you have any message, and will
automatically play new messages firstly if your answering machine has any new messages. If there’re no
new messages, it will play all messages on the answering machine.
3) When messages are playing, you can press keys as follows:
Press 2 -- To delete a message.
Press 4 -- To skip back to the previous message.
Press 6 -- To skip forward to the next message
Press 5 -- To pause and restart the current message. The pause time maximum is one minute. If not
quit from pause in one minute, then it will quite the message plays after one minute
automatically.
Press 8 -- To stop playback
When in remote, but not playing messages, you can press keys to start functions:
Press 1 -- To play the main menu
Press 5 -- To play messages
Press 7 -- To switch the answer machine between OGM1 and OGM2
Press 9 -- To switch the answer machine to TAM OFF
Speakerphone operation & volume control
Press key once to obtain a dial tone, dial your number, when you hear the called party answers the
phone. You can also answer an incoming call by pressing the key once.