MS400863M – User Manual
Page
9
of
15
©2019_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Figure 6: Mounting the Switch at the Rack Post
4.1.2
Desktop or Shelf Mounting
Step 1: Verify that the workbench is sturdy and reliably grounded.
Step 2: Attach the four adhesive rubber feet to the bottom of the switch.
Figure 7: Attaching the Rubber Feet
4.2
Power Supply and Grounding
Before the power supply cable is connected, the device must be grounded. Connect the
grounding screw at the rear side with protective earth of the buildings installation. Ensure
strain-relief and defined cable routing. Any damage of the cable must be prevented.
4.2.1
AC Power Supply
Step 1: Connect the AC power cord to the AC power receptacle of switch.
Step 2: Connect the other end of the AC power cord to the AC power outlet.
Step 3: Check the system LED. If it is on, the power connection is correct.
