Configuration
54
098-00777-000 Rev. A
Example
To provision the S80 for a GNSS reference with a cable delay of 315 ns, mask value of 30, with
GLONASS track-mode enabled (GPS + GLONASS), and dynamic position mode set to 0 (automotive),
perform the following steps:
1. Login at the Admin or Config-user level.
2. Type
set gnss cable-delay 315
and press Enter.
3. Type
set gnss mask 30
and press Enter.
4. Type
set gnss track-mode glonass enable
and press Enter.
5. Type
set gnss posmode dynamic model 0
and press Enter.
6. Type
show gnss status
and press Enter to verify that GNSS is enabled.
Provisioning NTP Parameters
Example
To enable NTP for IPv4, with a TTL value of 70, a DSCP value of 45. and an alarm threshold of 90:
1. Login at the Admin or Config-user level.
2. Type
set ntp state enable
and press Enter
3. Type
set ntp ipver 4
and press Enter
4. Type
set ntp ttl enable 70
and press Enter
5. Type
set ntp dscp 45
and press Enter
6. Type
set ntp alarmthresh 90
and press Enter.
Setting the System Date and Time
The S80 Time of Day can be set either by an external source, or manually with the “set clock” command.
You can only set the time and date if the S80 is not obtaining time from an external source of time
(GNSS) or if the time has never been obtained from a time reference.
Example
Enter date and time in YYYY-MM-DD,HH:MM:SS format (UTC).
1. Login at the Admin or Config-user level.
2. Type
set clock date-time <date-time>
and press Enter. Enter the value in format yyyy-mm-
dd,hh:mm:ss.
Configuring Alarms
This section describes the commands used to provision and manage alarms in the S80. The user can
provision the alarms to be enabled or disabled and set thresholds to turn the alarms on and off, as shown
in
. For a list of all alarms,
Software commands allow you to perform the following:
•
Provision the severity level
•
Provision the alarm (enable or disable)
•
Show current alarm settings
•
Show current alarms
•
Display alarm status
Содержание SyncServer S80
