Microscan MS-860 страница 8 Скачать руководство пользователя

Страница: 8 / 290

MS-860 Industrial Raster Reader User’s Manual

vii

Microscan Limited Warranty Statement and Exclusions

What Is Covered?

Microscan Systems Inc. warrants to the original purchaser that products manufactured by it will

be free from defects in material and workmanship under normal use and service for a period of

one year from the date of shipment. This warranty is specifically limited to, at Microscan’s sole

option, repair or replacement with a functionally equivalent unit and return without charge for

service or return freight.

What Is Excluded?

This limited warranty specifically excludes the following: (1) Any products or parts that have

been subject to misuse, neglect, accident, unauthorized repair, improper installation, or abnor-

mal conditions or operations; (2) Any products or parts that have been transferred by the origi-

nal purchaser; (3) Customer mis-adjustment of settings contrary to the procedure described in

the Microscan Systems Inc. owners manual; (4) Upgrading software versions at customer

request unless required to meet specifications in effect at the time of purchase; (5) Units

returned and found to have no failure will be excluded; (6) Claims for damage in transit are to

be directed to the freight carrier upon receipt. Any use of the product is at purchaser’s own risk.

This limited warranty is the only warranty provided by Microscan Systems Inc. regarding the

product. Except for the limited warranty above, the product is provided “as is.” To the maximum

extent permitted by law, this express warranty excludes all other warranties, express or implied,

including but not limited to, implied warranties of merchantability and. Technical support ques-

tions may be directed to: [email protected] Register your product with Microscan:

www.microscan.com/register fitness for a particular purpose. Microscan Systems Inc. does not

warrant that the functions contained in the product will meet any requirements or needs pur-

chaser may have, or that the product will operate error free, or in an uninterrupted fashion, or

that any defects or errors in the product will be corrected, or that the product is compatible with

any particular machinery.

Limitation of Liability

In no event shall Microscan Systems Inc. be liable to you or any third party for any special, inci-

dental, or consequential damages (including, without limitation, indirect, special, punitive, or

exemplary damages for loss of business, loss of profits, business interruption, or loss of business

information), whether in contract, tort, or otherwise, even if Microscan Systems Inc. has been

advised of the possibility of such damages. Microscan Systems Inc.’s aggregate liability with

respect to its obligations under this warranty or otherwise with respect to the product and docu-

mentation or otherwise shall not exceed the amount paid by you for the product and documen-

tation. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential

damages or limitations on an implied warranty, so the above limitation or exclusion may not

apply to you. This warranty gives you specific legal rights, and you may also have other rights

which may vary from state to state.

Tel: 425.226.5700 | Fax: 425.226.8250 | [email protected]

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание MS-860



































































































































































































































































































Результаты поиска

Содержание MS-860

Отзывы:

Похожие инструкции для MS-860

Бренды по названию

Популярные бренды

Microscan MS-860, Руководство пользователя

Результаты поиска

Содержание MS-860

Отзывы:

Похожие инструкции для MS-860

Бренды по названию

Популярные бренды