Microscan HAWK MV-4000 страница 4 Скачать руководство пользователя

Страница: 4 / 142

FCC Compliance Statement

Warning:

Changes or modifications to these units not expressly approved by the party responsible for the compliance

could void the user's authority to operate this equipment.

The use of shielded cables for connections of these devices to other peripherals is required to meet the regulatory

requirements.

Note:

These devices comply with Part 15 of FCC Rules. Operation is subject to the following two conditions:

These devices may not cause harmful interference, and

These devices must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for Class A digital devices, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of these devices in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his/her own expense.

Industry Canada Compliance Statement

These digital apparatuses do not exceed the Class A limits for radio noise emission from digital apparatuses set out

in the Radio Interference Regulations of Industry Canada.

Ces appareils numériques n’émettent pas de bruits radioélectriques dépassant les limites applicables aux appareils

numériques de Classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par Industrie Canada.

EU Notice (European Union)

WARNING:

These are class A products. In a domestic environment these products may cause radio interference in

which case the user may be required to take adequate measures.

AVERTISSEMENT:

Ces appareils sont des produits informatiques de Classe A. Lorsque ces appareils sont utilisent

dans un environnement résidentiel, ces produits peuvent entraîner des interférences radioélectriques. Dans ce cas,

l'usager peut être prié de prendre des mesures correctives appropriées.

This device complies with Directive 2004/108/EC for Class A digital devices. They have been tested and found to

comply with EN55022/CISPR22 and EN55024/CISPR24.

Ces unités sont conformes à la Directive communautaire Directive 2004/108/EC pour les unités numériques de

Classe A. Les tests effectués one prouvé qu’elles sont conformes aux normes EN55022/CISPR22 et EN55024/CISPR24.

Directive on Waste Electrical and Electronic Equipment (WEEE)

Europe

(English) European user’s information – Directive on Waste Electrical and Electronic Equipment (WEEE)

Please refer to the Microscan web site (www.microscan.com) for recycling information.

(Français) Informations aux utilisateurs Européens – Règlementation des déchets d’équipements électriques

et électroniques (DEEE)

Se référer au site Web de Microscan (www.microscan.com) pour l’information concernant le recyclage.

(Deutsch) Information für europäische Anwender – Europäische Regelungen zu Elektro- und Elektronikaltgeräten

(WEEE)

Bitte wenden Sie sich an dem Microscan-Website (www.microscan.com) für Recycling Informationen.

(Italiano) Informazioni per gli utenti europei – Direttiva sui rifiuti di apparecchiature elettriche ed elettroniche

(RAEE)

Si prega di riferirsi al sito Web Microscan (www.microscan.com) per le informazioni di riciclaggio.

Содержание HAWK MV-4000















































































































































Результаты поиска

Содержание HAWK MV-4000

Отзывы:

Похожие инструкции для HAWK MV-4000

Бренды по названию

Популярные бренды

Microscan HAWK MV-4000, Руководство пользователя

Результаты поиска

Содержание HAWK MV-4000

Отзывы:

Похожие инструкции для HAWK MV-4000

Бренды по названию

Популярные бренды