manualshive.com logo in svg

Microscan HAWK MV-4000, Руководство пользователя

Поделиться
Скачать
Microscan HAWK MV-4000 Скачать руководство пользователя страница 31

Connecting to the I/O Interface

System Components

2

HAWK MV-4000 Smart Camera Guide

2-17

Connecting to the I/O Interface

HAWK MV-4000 has an I/O interface with 7 optically isolated signals.

Inputs

Four of the signals are inputs. They support sinking (NPN) and sourcing (PNP) 

configurations and can receive 24V. Note that sinking (NPN) or sourcing (PNP) for inputs 

cannot be mixed in a system because the Input Common is shared by all Inputs.

One input is dedicated as the camera trigger (sensor). The other three are configurable 

general-purpose inputs. When the HAWK MV-4000 is used with the QX-1 interface device 

and photo sensor, the trigger signal is automatically connected to the correct input channel.

Input Signals:

•

Trigger (Sensor)

•

Input 1

•

Input 2

•

Input 3

•

Input Common

Outputs

Three of the signals are outputs. They support sinking (NPN) configurations and operate 

at up to 24V nominal. It is possible to connect one of the outputs in a sourcing (PNP) 

configuration, but the other two outputs would no longer be available.

All three outputs are configurable for general-purpose use, but when External Strobe is 

enabled in the software, Output 3 becomes dedicated to that purpose. When the HAWK 

MV-4000 is used with the QX-1 interface device, or with any of the NERLITE Smart Series 

lighting cables, the Strobe Output signal from the camera is automatically connected to 

strobe trigger input on the Smart Series light.

Output Signals:

•

Output 1

•

Output 2

•

Output 3 (External Strobe when Enabled)

•

Output Common

Содержание HAWK MV-4000















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды