Microplex SOLID F44, Руководство пользователя

Страница: 7 / 167

Safety Regulation
V
1.4 CE Marking (Declaration of Conformity) (For European Users)
This product complies with the following EU directives:
2006/95/EC and 2004/108/EC directives.
This declaration is valid for the area of the European Union(EU) only.
This device must be used with shielded interface cable and shielded network
cable.
The use of non-shielded cable is likely to result in interference with radio
communications and is prohibited under rules.
1.5 Acoustic Noise
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure level
at the operator position according to EN27779 is equal to or less than 70dB
(A).
2 Safety Information
2.1 Laser Safety
This printer is a page printer which operates by means of a laser. There is no
possibility of danger from the laser, provided the printer is operated according
to the instructions provided in this manual.
Since radiation emitted by the laser is completely confined within protective
housing and external covers, the laser beam cannot escape from the machine
during any phase of user operation.
This printer is certified as a Class 1 laser product: This means that the printer
does not produce hazardous laser radiation.
2.2 Internal Laser Radiation
Maximum Average Radiation Power: 37 µW at laser Aperture of mirror unit
Wave Length: 770-800 nm
This product employs a Class IIIb Laser Diode that has an invisible laser
beam. The Laser Diode and Scanning Polygon Mirror are incorporated in the
print head unit.
The print head (in the interior of the printer in front of the toner cartridge)
consists of the print head unit and the mirror unit. The laser beam is emitted
from the print head unit, passes through the mirror unit, and then is radiated
through the laser aperture of the mirror unit to the interior of the printer.
2.3 CDRH Regulations
(For United States)
This printer is certified as a Class I laser product under the Regulation
Performance Standard according to the Food, Drug, and Cosmetic Act of
1990.
Compliance is mandatory for laser products marketed in the United States,
and is reported to the Center for Devices and Radiological Health (CDRH) of
the U.S. Food and Drug Administration (FDA) of the Department of Health
and Human Services (DHHS). This means that the product does not produce
hazardous laser radiation.
The label shown the indicated compliance with the CDRH regulations and
must be attached to laser products marketed in the United States.