Microplex SOLID F44, Руководство пользователя

Страница: 42 / 167

3-1
3. Configuring the Printer
3.1 What is Configuring?
This chapter describes how to use the control panel and menu to set up or
configure your printer so that the printer and your computer system can
communicate correctly with each other.
The important menus are:
−
SELECT PROFILE
−
CHANGE PROFILE
– PAPER MENU
– PCL MENU or HEXDUMP MENU
−
GENERAL MENU
−
BASIC SETTINGS
−
CONFIG. MENU
−
TEST MODE
−
TEST MENU
− INFO MENU
3.1.1 Profiles
All parameters which characterise a print job and its corresponding form (e.g.
SOURCE
,
PAPER LENGTH
,
ORIENTATION
, and
FUSER TEMP
.) are contained in
one profile. In total 50 PROFILES are available and can be either programmed via
the operator panel or by means of the utility called Profiler F44 . The profiler provides
an utmost comfortable way of creating profiles. More about the Profiler F44 you will
find on the next page.
There are two items in the OFFLINE MENU which deal with profiles, SELECT
PROFILE to activate a profile and CHANGE PROFILE to define its contents. All
parameter settings via the operator panel, via the Profiler F44 or via PJL commands
are affecting the actually selected profile. The number of the actually selected profile
is shown in the first line of the operator panel. After switching on the printer the last
selected profile will be active.
The function RECALL FACTORY in the CONFIG. MENU is setting all parameters of
all profiles to the factory default values.
Different applications use also different settings. All these settings for an application
are collected in a PROFILE .
For example: Application A needs fanfold paper with a paper length of 6 inch and a
top margin of one, application B processes fanfold paper with a paper length of 12
inch and a top margin of six.
Simply by pressing
SELECT PROFILE the Profile containing the information for the
specific application requirements can be activated.