102 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
9.5.1. Starting the (Printer’s) Measurement of Label Length
Use the panel function
logiJET T4-2\Paper Menu \ Paper Size \ Page Length \
Measure Length
The printer performs a material feed and reports the measured label length on
the display.
Use the ENTER key to confirm this value (configuration of the measured label
length).
In addition this new value can be saved permanent as setup value (using the
ENTER key, again).
9.5.2. Configuration of Semiautomatic Label Length Measurement
The panel function
logiJET T4-2\Paper Menu \ Paper Size \ Page Length \
Auto.Measurement
serves to switch the semiautomatic label length measurement function to on or
off (and to save this setting as setup value).
If the semiautomatic label length measurement function is chosen, the printer
automatically offers
you the
measurement of the label length
after
every printer power on and
after every
closing of the printhead
(for
example after the inserting of a new label roll):
Panel display [Measure length ]
Use the ENTER key to start the measurement of label length, use the ESC key to
suppress this function.
The printer saves the measured label length temporal (as long as the printer
stays turned on).
