micronit microfludics FLUIDIC CONNECT 4515, Руководство пользователя

Страница: 5 / 19

2 ASSEMBLY AND ADJUSTMENTS
2.1 STEP 1: PARTS CHECK
2.2 STEP 2: CHIP PLACEMENT
In this section, the assembly of the chip holder will be discussed step by step. Please pay
attention to step 4, as this step contains two different assembly methods, depending on the
type of Fluidic Connection Kit that is used.
Check the parts list on page 18 to see if all the parts are included.
Figure 2.1. All the parts of Fluidic Connect 4515
Clean the chip holder and place the chip in the chip holder. The user-friendly design allows the
user to push (slide) the chip into the chip holder over a flat surface (see Figure 2.2). Make sure
that the arrow on the chip cartridge directs to the holder.
Figure 2.2. Slide the chip into the chip holder
Fluidic Connect 4515 - User Manual V1.5 5