MicroNet SP6824P, Руководство пользователя

Страница: 13 / 80

13
2.6 Rack- Mount Placement
Before mounting the Switch, please read the following instructions carefully,
Elevated
Operating
Ambient
If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater
than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by the
manufacturer.
Reduced Air
Flow
Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is
not compromised.
Mechanical
Loading
Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical
loading.
Circuit
Overloading
Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of
the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
Reliable
Earthing
Reliable earthing of rack-mounted equipment should be
maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit
(e.g. use of power strips)."
To mount the Switch in any standard-sized, 19-inch wide, 1U high rack, please
follow these instructions:
Place the Switch on a hard flat surface with the front panel facing you.
Attach a rack–mount bracket to one side of the Switch with the supplied
screws. Then attach the other bracket to the other side. (
Figure 2.6.1 )
Figure 2.6.1