MicroNet SP6824P, Руководство пользователя

Страница: 59 / 80

59
Commands Description Syntax
2) mgmt-accesslist enable
This command enables management
access list. Only the IP address
specified in the management list is
allowed to access DUT.
Format mgmt-accesslist enable
Mode Global Config
3) mgmt-accesslist disable
This command disables management
access list.
Format mgmt-accesslist disable
Mode Global Config
1) monitor enable
This command enables port
mirroring.
Format monitor enable
Mode Global Config
2) monitor disable
This command disables port
mirroring.
Format monitor disable
Mode Global Config
3) monitor des
Configure destination port.
3.1) monitor des <port-ID>
probetype bidirection
This command configures port
monitor probetype as bi-direction
traffic.
Format monitor des < port-ID > probetype
bidirection src < port list >
Mode Global Config
e.g. Switch(config)# monitor des 1
probetype bidirection src 2-8
3.2) monitor des <port-ID>
probetype ingress
This command configures port
monitor probetype as ingress traffic.
Format monitor des < port-ID > probetype
ingress src < port list >
Mode Global Config
e.g. Switch(config)# monitor des 1
probetype ingress src 2-8
monitor
3.3) monitor des <port-ID>
probetype egress
This command configures port
monitor probetype as egress traffic.
Format monitor des < port-ID > probetype
egress src < port list >
Mode Global Config
e.g. Switch(config)# monitor des 1
probetype egress src 2-8
1) dot1x enable
This command enables global 802.1x
function.
Format dot1x enable
Mode Global Config
2) dot1x disable
This command disables global 802.1x
function.
Format dot1x disable
Mode Global Config
3) dot1x port-control
Configure port auto-authentication mode.
3.1) dot1x port-control enable
This command set auto-authorized
on a list of ports.
Format dot1x port-control enable port
< port list >
Mode Global Config
dot1x
3.2) dot1x port-control disable
This command set force authorized
on a list of ports.
Format dot1x port-control disable port
< port list >
Mode Global Config
e.g. Switch(config)# dot1x port-control
disable port 1-4
1) network mgmt-vlan
This command changes
management vlan.
Format network mgmt-vlan < vlan-ID >
Mode Global Config
2) network parms
This command configures static IP
address of the switch.
Format network parms < IP addr >
< subnet mask > < gateway >
Mode Global Config
3) network protocol
This command configure switch dhcp
client.
Format network protocol {dhcp|none}
Mode Global Config
network
4) network dhcp-relay
Configure switch dhcp relay functions