Micron Electronics TRANSPORT XKE, Руководство пользователя

Страница: 65 / 90

6 6
The modem disconnects
prematurely.
Excessive modem retrains.
The modem remains connected
when the communication
software is terminated.
The modem cannot transfer an
entire file, or it aborts during a
transfer.
The message “Flash device
corrupted” appears.
The message “PBX detected,
please hang up phone line”
appears.
It takes longer than expected to
transfer a file.
Your communications software
can’t find the modem.
Make sure that the remote
modem supports error
correction. If it does not, set
the modem for normal mode
(AT\N) and retry the call.
Disable auto-retrain using
AT%G0.
Retry call. Frequent retrains
indicate a line problem.
Contact your telephone
company.
Set the modem to disconnect
on drop of DTR, using
AT&D2.
Make sure that the
computer’s flow control
setting is the same as the
modem’s setting (e.g., XON-
XOFF).
Contact the technical support
group for information on
how to upgrade modem
software.
Disconnect the RJ-11 cable
from the wall outlet. Find an
analog phone line to plug the
modem into.
Determine which file transfer
protocol you are using. Refer
to the communications
software manual for protocol
descriptions and options.
Verify that the modem is
assigned a COM port that is
supported by the
communications software.
If you’re using Windows 95 or
Windows NT, click Start,
Control Panel, Modems and
Diagnostics.
Add an AT-A71 to your
modem’s initialization string.
Choose a DTE port rate of less
than 115200.
Enable verbose response codes
with ATV1.
Your communications software
does not understand CONNECT
230400 responses.
Numeric result codes always
indicate a connection at 115200.