RM – 26-10-7707 Rev.
E
Page
14
of
39
5)
ASSEMBLY WITH ASSEMBLY TOOLS
a) It is recommended that assembly tools be used to assemble the actuator.
i) The assembly tools simplify assembly and significantly reduce the likelihood of damaging
critical parts and features during the assembly process.
b) A following Section below outlines a method to assemble the actuator without assembly tools.
c) Assembly tool kit part numbers are identified in
SECTION 7
.
d) Differences between GEN1 SB-18 and the GEN2 SB-18.2 models are outlined below.
e) Reference the Exploded View sheets in
SECTION 7
for Item #’s.
f) Assembly Tool Kits:
i) There are two different assembly kits available for each shaft end type (Flat or Round).
Reference the Assembly Tools figures.
ii) A detailed Bill of Material for the tool kits is available in
SECTION 7.
iii) During the assembly of the unit, the seals
MUST
be protected to avoid damage – the
assembly tools provide the highest level of protection.
