CAUTION!
READ THE FOLLOWING SAFETY PRECAUTIONS
BEFORE SETTING UP AND USING THIS MACHINERY.
Warning: Normal use of this product can expose the user to materials (wood smoke) known to the State of
California to cause cancer and birth defects or other reproductive harm, or other Proposition 65 listed chemicals.
To prevent bodily injury to yourself or others,
please use common sense
when using a machine, such as this
one, that employs high voltage electronics, laser beams, motors and other mechanisms. These instructions
cannot cover every situation you may encounter when using this machine, but the following information,
which you must read before using this machine,
will help you understand its workings and help avoid
personal injury. If you need further explanations of specific concern, please call our technical service department
at 908-464-1094 for more information.
This machine employs an
invisible beam
of high energy light to cut through soft materials, such as wood and
plastic. It will easily cut and/or burn human flesh and will cause injury if you are not careful to avoid contact
with the laser beam. Do NOT reach into the cabinet unless the machine is switched off
and
the power control
knob is turned all the way off (turned all the way counterclockwise). To avoid injury, do not place any part of
your body in the beam’s line of action (at the output end of the laser, between mirrors, and/or under the lens).
To avoid fracturing the glass laser tube, cooling water MUST be circulating before power up. Make sure the
cooling water is flowing through the system by checking the return line (labeled Water Out) to the water bucket
for water flow.
The front-right chamber of the cabinet contains high voltage electrical connections. Do NOT reach into this
chamber unless the power cord is disconnected from the machine.
Avoid contact with any connections to the laser tube unless the power cord is disconnected from the machine.
Since this machine uses an electric-driven water pump which circulates water through the product, the use of
GFI circuitry to protect from electric shock is
MANDATORY
.
2
(GFI PROTECTED)
GENERAL
EQUIPMENT LAYOUT
