BP3KN1-3B
15
IB BP3KN1-3B V4920 EN
EN
at an early stage.
6. Data Memory
This model is designed for two users and can store up to 99 blood pressure readings for
each user.
Select either user 1 or 2 by pressing the time button.
Viewing the stored values
Press the M-button briefly, when the device is switched off. The display first shows «M» and
«A», which stands for the average of the last 3 measurements in memory.
Pressing the M-button again displays the previous value. Pressing the M-button repeatedly
enables you to move from one stored value to another.
Blood pressure readings with suboptimal cuff fit 15-A are not considered in the average
value.
Memory full
Pay attention that the maximum memory capacity of 99 memories is not exceeded.
When
the 99 memory is full, the oldest value is automatically overwritten with the 100
th
value.
Values should be evaluated by a doctor before the memory capacity is reached – otherwise
data will be lost.
Clearing all values
Make sure the correct user is activated.
If you are sure that you want to permanently remove all stored values, hold down the
M-button (the device must have been switched off beforehand) until «CL ALL» appears and
then release the button.
To permanently clear the memory, press the time button while «CL ALL» is flashing.
Individual values cannot be cleared.
Cancel deletion: press ON/OFF button while «CL ALL» is flashing.