Microlife 046932, Руководство пользователя

Страница: 17 / 48

aponorm
®
Basis Plus 15 EN
Now you need to improve the reception by choosing another
location or set the clock manually (for more information see
„manual setting“). After a change of location, batteries have to
be re-inserted or to reset radio clock to „ON” to restart the auto
setting again.
Manual setting
(if automatic setting does not work or is not desired):
The device must be in ON mode. If you do not press any
buttons for 1 minute during the time setting, the time setting
mode switches off and „ - : - - “ appears in the clock display.
1. Press down Time button several seconds until „bI OFF “
appears on the display.
2. Press Time button again, the radio clock indicator and
„ON“ appears in the display.
3. Press the M button to switch on („ON“) or switch off the
radio clock („OFF“).
4. Press ON/OFF button to confirm and return to standby mode,
or if the radio clock is switched off, you can press Time
button to confirm.
5. The year number flashes in the display. You can set the year
by pressing either the «+» 11 or the «-» 10 button. To confirm
and then set the month, press the time button
8
.
6. Press the «+»
11
or the «-»
10
button to set the month. Press
the time button 8 to confirm and then set the day.
7. Follow the instructions above to set the day, hour and
minutes.
8. Once you have set the minutes and pressed the time button,
the date and time are set and the time is displayed.
9. If you want to change the date and time, press and hold the
time button down for approx. 3 seconds until the year
number starts to flash. Now you can enter the new values as
described above.
Selecting the correct cuff
aponorm ® by microlife offers different cuff sizes. Select the cuff
size to match the circumference of your upper arms (measured
by close fitting in the centre of the upper arm).
Cuff size for circumference of upper arm
S 17 - 22 cm
M 22 - 32 cm
M - L 22 - 42 cm
L - XL 32 - 52 cm
)
Only use aponorm
®
by microlife cuffs.
` Connect the cuff to the device by inserting the cuff
connector
7
into the cuff socket
3
as far as it will go.
3. Taking a Blood Pressure Measurement using
this Device
Checklist for taking a reliable measurement
1. Avoid activity, eating or smoking immediately before the
measurement.
2. Sit down for at least 5 minutes before the measurement
and
relax.
3. Always measure on the same arm (normally left).
It is recommended that doctors perform double arm measu-
rements on a patients first visit in order to determine which
arm to measure in the future. The arm with the higher blood
pressure should be measured.
4. Remove close-fitting garments from the upper arm. To avoid
constriction, shirt sleeves should not be rolled up – they do
not interfere with the cuff if they are laid flat.