Microlife 046932, Руководство пользователя

Страница: 16 / 48

aponorm ® by 14
• If you suffer from an irregular heartbeat (arrhythmia, see
«Section 4.»), measurements taken with this device should
be evaluated with your doctor.
•
The pulse display is not suitable for checking the
frequency of heart pacemakers!
• If you are
pregnant , you should monitor your blood pressure
very closely as it can change drastically during this time!
)
This monitor is specially tested for use in pregnancy and
preeclampsia. When you detect unusual high readings in
pregnancy, you should measure again after 4 hours. If the
reading is still too high, consult your doctor or gynaeco-
logist.
How do I evaluate my blood pressure?
Table for classifying home blood pressure values in adults in
accordance with the international Guidelines (ESH, AHA, JSH).
Data in mmHg.
2. Using the Device for the First Time
Inserting the batteries
After you have unpacked your device, first insert the batteries.
The battery compartment
5
is on the bottom of the device.
Insert the batteries (4 x size AAA 1,5 V), thereby observing
the indicated polarity. Switch the Lock Switch
14 to «unlock»
position.
Setting the date and time
Your aponorm
®
Basis Plus upper arm blood pressure monitor is
equipped with a radio clock, which is controlled by the DCF77
signal. This time and date are set automatically. If no DCF77 sig-
nal (this is the term for the time signal transmitter) is available,
the time is not adjusted automatically.
The display comes to receiving mode and device sets the time
automatically, after insert batteries.
)
If you do not wish to set the time or you want to take a
measurement immediately, exit the time setting mode by
pressing the Start/Stop button
1
.
Once the time signal is received, the radio clock icon
24
flashes
on the display every second until the reception of the DCF77
signal is complete.
While receiving the DCF77 signal, the radio clock icon
24 flashes
first with 1, then 2 and then 3 bars above it. When the icon
appears with 3 bars, the time has been set. First the date and
then the time are displayed at the top right of the display. Then
the time is displayed permanently together with the radio clock
icon
24
.
)
The automatic setting of date and time takes about 2-4
minutes. If no signal is received within 10 minutes, „-: - -“
appears on the display.
The higher value is the one that determines the evaluation.
Example: a blood pressure value of
140/80 mmHg or a value of
130/90 mmHg indicates «blood pressure too high».
Range
blood
pressure
too low
1. blood pressure
optimum
2. blood pressure
elevated
3. blood pressure
too
high
4. blood pressure
dangerously
high
Systolic
z
100
100 - 130
130 - 135
135 - 160
160
y
Diastolic
z
60
60 - 80
80 - 85
85 - 100
100
y
Recommendation
Consult your doctor
Self-check
Self-check
Seek medical advice
Urgently seek
medical advice!