Microframe Corporation
7
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 3500
MultiPage Transmitter Specifications
MultiPage Transmitter Detailed Operation
Programmable Configurations, Options continued…
OPTION 3 – Re-Page Time for Vibrating Pagers
This is the time between re-pages for vibrating pagers. For example, if the re-page time is set to one
minute, then the pager will be re-paged every minute. Using the “*” and “#” keys, you may choose between
0 and 25 minutes for the re-page time. A re-page time of 0 disables the re-paging feature. When you have
selected your desired re-page time, press [ENTER] to return to the main options menu.
OPTION 4 – Set Display ID Address
This option is used to tell the transmitter the address of the display. The factory default is 1500. If you
change this address, you will also have to set up the display to respond to your new address (see Display
Options.)
OPTION 5 – Base ID
The Base ID is the digital identification in which all components of a system run. The factory default for this
number is 0500000. This number may be changed to avoid “cross talk” with other nearby systems. It is
recommended that users do not change this setting. If you change this ID number, then the display and
pager settings will have to be changed accordingly.
NOTE: Pager Base ID can only be changed at the factory.
OPTION 6 – Baud Rate
This is the rate at which the digital communications takes place in your system. It is recommended that
users do not change this setting. If you change this number, the display and pager settings will have to be
changed accordingly.
NOTE: Pager Baud Rate can only be changed at the factory.
OPTION 7 – Out of Range
This feature is available only with coaster systems. When the out-of-range option is activated, the
transmitter will periodically send a page telling everyone that they still are in range. If a coaster also has its
out-of-range feature activated, it will sound an alert within 1 minute of leaving the transmitter’s coverage
area.
OPTION 8 – Behavior
The behavior option exists to accommodate those users who are more familiar with the DataPage Lite
standard interface and do not need the display or re-paging capabilities of the MultiPage. The behavior
setting can be toggled between “MultiPage” and “DataPage Lite." In DataPage Lite mode, the re-page
feature is disabled and the transmitter will simply wait for a pager number and then page a pager. The
screen and button behavior will revert to the DataPage Lite operation.
Paging Protocol
POCSAG
Frequency
457.575 MHz
Power
2 Watts
Coverage Area (indoors)
1/4 to 1/2 Mile
TX Baud Rate
512 or 1200
Transmitter Dimensions
9" x 7.25" x 2"
FCC Approval No.
QBTLTK-1100H
Mounting
Desk or Wall-Mount
Max Numbers Shown on Display
20
Max Pagers in Re-Page Queue
30
