Microframe Corporation
11
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 3500
Pocket Pager 2
Features
The Pocket Pager 2 is designed to work with the MultiPage
family of on-premise transmitters. The battery-powered pager
can show any numeric message sent by the transmitter.
Optionally, the pager can show up to three factory pre-
programmed text messages corresponding to the beep type
specified.
Turning on the Pager
Hold down the LARGE BLACK BUTTON until the pager comes
on.
Sending A Page
Please see the diagram in the MultiPage section of this manual
for detailed instructions on sending pages.
Activating a Pre-Defined Message
To activate a pre-defined message on a vibrating pager, type in the pager number followed by the [SEND] key.
You will be prompted for a “BEEP TYPE (1-4).” Select 1-3 here and press the [SEND] key. This will display on
the pager one of the three pre-programmed text messages stored in the pager. If no number is chosen, the pager
will default to Beep Type 4 (“PAGING”).
Sending a Numeric Message
To send a numeric message to a pager, simply type in the pager number followed by the [SEND] key. The
transmitter screen will display “BEEP TYPE.” Simply press [ENTER] to bypass this. The transmitter screen will
then display “ENTER MESSAGE.” Using the number keys, type in a numeric message up to 16 digits followed by
the [SEND] key. Note: If the message portion of a page is not blank the “BEEP TYPE” pre-defined message
selected will be ignored.
Receiving a Page
The Pocket Pager 2 will start to vibrate when it is paged. No action is necessary on the receiving end. The pager
will stop vibrating after approximately eight seconds. If the user would like to stop the vibration before the eight
seconds, simply press the LARGE BLACK BUTTON. If a numeric message is sent to the pager, the message will
be visible on the pager's LCD screen until the pager stops vibrating. To view the message after the pager has
stopped vibrating, press the LARGE BLACK BUTTON once.
Sending a Group Call Page
All pagers respond to call number “900” (unless another group call number has been chosen by the customer and
programmed at the factory). To page all pagers at once, simply enter “900” and [SEND]. Then press [SEND]
again at the beep type prompt.
Manual Pager Turn-Off
Press the [DOWN ARROW] button until you see the words “PGR OFF” on the LCD screen. Press the LARGE
BLACK BUTTON once to confirm. NOTE: If you have chosen to order the pagers with the on/off button disabled,
then pagers can be turned off from the transmitter. If you want the off/on button activated on the pager; this must
be requested at time of purchase.
Pager Turn-Off from Base
Enter the pager number followed by the [SEND] key. Press [ENTER] to bypass “BEEP TYPE” screen. When
screen reads “ENTER MESSAGE,” enter the message code “*0“ followed by [SEND]. Since all pagers respond to
call number “900,” paging “900” with the message code “*0” will turn all pagers off.
Lighting Function
Pressing the [UP ARROW] button will turn on the backlight on the LCD screen. The light will shut off automatically
after approximately 30 seconds, or the user may turn the light off manually by pressing the [UP ARROW] button
once.
CAUTION
a) The pager is made up of LCD and precision elements. Avoid water and high temperature.
b) Remove the battery if the pager will not be in use for a long period of time.
c) If the pager is not working properly, do not dismantle or repair it yourself. Call Microframe for technical service.
