background image

 

 

 

Microframe Corporation 

 

 

 

 

 

 

 

2

 

604 South 12

th

 Street 

Broken Arrow, OK  74012 
800-635-3811 
www.microframecorp.com 

 

 

 

 

 

 

Series 3500 

Limited Warranty Agreement 
Your  Microframe  System  is  warranted  against  failure  due  to  defects  in  workmanship  or material  for  a  period  of 
one (1) year from the date of purchase.  Microframe Corporation will repair or replace any defective unit. Obvious 
abuse or mishandling of the unit is NOT covered by this warranty. 
 
Merchandise Return 
If your Unit does not work satisfactorily, please give us a call. We may be able to clear up the problem by phone. 
If it becomes necessary to return your Unit to the factory, please observe the following: 
1. Call Microframe for an RMA number.  This will authorize you to return the unit. 
2. Place Unit in a sturdy box with sufficient packing material. 
3. If requested, include the AC power adapter. It is not necessary to return the cable and connectors unless they 
are the problem. 
4.  Return  the  system  insured  and  prepaid.  Microframe  is  not  responsible  for  shipping  damages  and  losses  on 
returned Units. 
 
Warranty Service 
For warranty service, please contact Microframe toll-free at 800-635-3811. One of our technicians will be glad to 
assist you. 
 
Assistance 
For any product assistance or maintenance help, contact Microframe by either calling 800-635-3811 or e-mailing 
us at: [email protected]
 
Safety 
Do not install substitute parts or perform any modification to the product without first contacting Microframe.  
 
Disclaimer 
We constantly strive to improve our products. Specifications are subject to change without notice. 
 
Warning 
All power adapters, line cords, and electrical equipment should be kept out of the reach of children and away from 
water. (If you are installing cable in an air plenum area, such as a drop ceiling used for air return, you must use 
plenum-rated  cable.  The  cable  supplied  from  Microframe  is  rated  CL2  and  is  approved  for  indoor  installation 
everywhere except plenum areas.) 
 
Life Support Policy 
Microframe's  products  are  not  authorized  for  use as components  in  life  support  devices  or  systems  without the 
express written approval of the President of Microframe Corporation. As used herein: 
1.  Life  support  devices  or  systems  are  defined  as  systems  which  support  or  sustain  life,  and  whose  failure  to 
perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably 
expected to result in a significant injury to the user or any one depending on the system. 
2.  A  critical  component  is  any  component  of  a  life  support  device  or  system  whose  failure  to  perform  can  be 
reasonably  expected  to  cause  the  failure  of  the  life  support  device  or  system,  or  to  affect  its  safety  or 
effectiveness. 
 
FCC Notice (for wireless products only) 
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in  a  residential installation. This  equipment  generates, uses, and can radiate radio frequency energy and,  if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures: 
— Reorient or relocate the receiving antenna. 
— Increase the separation between the equipment and receiver. 
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
— Consult the dealer or an experienced radio/TV technician for help. 

 
 
 

Содержание 3500 series















Отзывы: