Appendix E: Mobil Product Data Sheet
mpds-2 09/30/2010
LV1 User Manual
E-1
Appendix E: Mobil Product Data Sheet
Mobil DTE
®
20 Series Super-Stabilized, Antiwear Hydraulic Oils
Description
Mobil DTE 20 Series high-quality hydraulic oils were developed in cooperation with pump and
component manufacturers specifically for severe hydraulic systems using high-pressure, high-
output pumps. These oils provide the superior Antiwear and film strength characteristics
necessary for critical systems. They are formulated from stable, high-quality, high-VI base stocks
and additives which provide the specific properties required in hydraulic fluids. Mobil DTE 20
Series provide outstanding performance in all standard industry tests, and are approved in the
Denison HFO, Vickers V-104C and 35VQ25, and Sundstrand pump tests. Their 12-stage rating in the
FZG Gear Test demonstrates a high level of protection against wear and scuffing. Mobil DTE 24,
25, and 26 are qualified against Cincinnati Milcron specifications P-68, P-70 and P-69,
respectively.
The super-stabilized additive system of the Mobil DTE 20 Series was selected to neutralize the
formation of corrosive materials, provide excellent anitwear properties, and multimetal
compatibility. This additive system also provides better thin oil film protection against rusting,
retention of superior oil cleanliness, and improved compatibility with water.
Typical Characteristics
Physical characteristics are listed in the table. Values not show as maximum or minimum are
typical and may vary slightly.
Applications
Mobil DTE 20 Series oils are Mobil's primary recommendations for most hydraulic applications in
industrial marine and mobile service, including high-pressure systems.
Advantages
Mobil DTE 20 Series oils offer the following performance benefits:
•
Excellent keep-clean performance for systems critical to deposit buildup, such as
sophisticated NC control mechanisms
•
Controlled demulsibility allows the oils to work well when contaminated with small
amounts of water and to separate large amounts of water readily
•
Multimetal compatibility under both wet and dry conditions protects pumps using steel and
copper alloys
•
Excellent protection against rust; good thin oil film protection for surfaces intermittently
wetted by oil
•
Outstanding load-carrying and antiwear properties provide superior protection against
wear