MicroCool BIGHORN 1000, Инструкция по установке и обслуживанию

Страница: 15 / 36

BIGHORN_March 2020.docx
March 26, 2020 Page
15 of 36
13.
INSTALLATION OF REUSABLE HOSE FITTINGS
Reusable hose fittings are used to make high pressure hose connections. They are used to join manifold hoses to
high-pressure pump modules, atomization lines and for numerous other applications. There are various styles of
reusable hose fittings, but the method used to fit them to hose is the same.
Figure 1: Tools Required Figure 2: Screw Ferrule onto
Hose Counter/Anti Clockwise
Figure 3: Tighten Ferrule on
Hose
Figure 4: Stop Tightening when
the Line is within 1/16”-1.6 mm
of Thread
Figure 5: Dip Applicator in
Silicone
Figure 6: Apply Silicone to
Stem
Figure 7: Apply Silicone to
Inside of Ferrule
Figure 8: Screw Stem into
Ferrule
Figure 9: Using a Wrench,
Screw in the Ferrule
Figure 10: Stop with 1/8” - 3mm
Gap
Figure 11: Fitting Installed Figure 12: Female Swivel
Fittings Do NOT Require Tape
on the Male Fitting